Frequent Question On NXP Freescale I.MX6 Mainboard
Contact Us
Add: 5F, Building 3A, No.8 Xiyuanyi Road, West Lake Science Park, Hangzhou, China
Tel: +86-571-87858811
Mob: +8613616520351
E-mail: trade@qiyangtech.com
Frequent Question On NXP Freescale I.MX6 Mainboard
Home > FAQ > Frequent Question On NXP Freescale I.MX6 Mainboard

 Frequent Questions About I.MX6 Mainboard

Q.: Can we use dtsfile on your I.MX6 SBC ?

A: Yes, when the OS is above Linux 3.10.53

-------------------------------------------------

Q: Can we use SPDIF signal ?

A: The SPDIF signal did not brought from the I.MX6 SBC. But you can get this signal by re-design it. Qiyang offers customization services.

A:The SPDIF signal has been brought from the I.MX6 SOM. But ENET_CRS_DV did not be brought from the CPU. And RGMII_TXC signal be multiuse with RGMII_TXC s

-----------------------------------------------------

Q: About I2S signal ?

A: On I.MX6 Development Kit ,it has I2S signal, it is audio signal.

------------------------------------------------------

 

Q: Does the I.MX6 SBC or I.MX6 Dev. Kit has analogue signal?

A: The audio input and audio output are analogue signals on the I.MX6 SBC and I.MX6 Dev. Kit

  All GPIO signal is digital signal on the I.MX6 SBC and I.MX6 Dev. Kit.

Touch Panel signal (I2C) is analogue signal on the I.MX6 SBC and I.MX6 Dev. Kit.

--------------------------------------------------------

 

Q: Can we use Yocto on your mainboard ?

A: We don’t suggest to use the Yocto.

As Our compiling environment is base on Ubuntu , Linux. It shall generate the Uimage.

  If you are using the Yocto on compiling, the file format shall be Zimage.

  Our uboot can’t use Zimage file. It leads to the boot issue

-------------------------------------------

Q: Why there is no image shown on HDMI when connecting to the I.MX6 Mainboard ?

A: It’s normal when you run Linux OS. When you activate the QT, the HDMI will show the operation interface.

 

------------------------------------------------------

Q: Can your LVDS supports 1080 Pixel ?

A: Yes, we have 2X LVDS connector on I.MX6 SBC &I.MX6 Dev. Kit. Dual channel, each channel is with 8bit.

We can combine 2XLVDS signal into 1 channel , and it can support 1080 Pixel.  

We have been debugged variety of 1080P LVDS screens (24bit )for customer use. If you have any demand, you can contact the sales to ask the specific model no.

 

--------------------------------------------------------

Q: What’s your board’s operation temp. ?

A: Our standard board are using Consumer-Extend CPU.  CPU temp. from -20°C~105°C.

Our mainboard can work from -20°C~70°C (Lab Test).


  • Newsletter
  • Categories
  • Contact Us
    Add: 5F, Building 3A, No.8 Xiyuanyi Road, West Lake Science Park, Hangzhou, China
    Tel: +86-571-87858811
    Mob: +8613616520351
    E-mail: trade@qiyangtech.com
  • QR Code
  • Copyright © Zhejiang Qiyang Intelligent Technology Co.,Ltd All Rights Reserved.